HDPE fittings are a frequently used material in industry. It is a pipe made from high-density polyethylene and is used as an iteration of polyvinyl chloride drinking water pipe. HDPE is a highly crystalline, non-polar thermoplastic resin. It has excellent resistance to most household and industrial chemicals. HDPE has excellent electrical properties, particularly high dielectric strength, making it well suited for use in electrical wire and cable. As a rule, HDPE fittings are highly resistant to compression, have a long service life, and offer superior performance. If you would like to learn more about HDPE fittings, the following article will be an education guide for you through what HDPE fittings Malaysia is, what it is used for, and its advantages in industry.
Benefits of HDPE fittings Malaysia
Good impact resistance, corrosion resistance: HDPE fittings Malaysia has good impact resistance. This means that it is virtually indestructible to shock waves and therefore does not crack or spall. It is three times more impact resistant than steel and requires no special tools or processes to operate. All that is required is to wrap plastic film around the pipe to withstand the pressure of the gas in the pipe. This also allows HDPE fittings to be free from gas leakage due to pipe rupture. During construction, the strength of HDPE fittings can reach the level of HV pipes.
In addition, HDPE fittings Malaysia have an excellent chemical stability. This type of pipe is rarely attacked by acids and bases and does not suffer from corrosion problems. This makes it effective in preventing damage to the pipe from corrosive media such as salt and alkali.
Easy to install: Installation of HDPE fittings Malaysia usually does not require any tools. It is very easy to install. This saves a lot of labor as well as a lot of materials, saves time and reduces production costs. In addition, HDPE fittings Malaysia are easy to maintain and can withstand a variety of harsh environments. This makes it possible to install HDPE fittings anywhere.
Long service life: HDPE fittings Malaysia have a service life of more than 50 years, which is longer and better quality for buried pipes, allowing for better protection of the surrounding environment and better protection of people’s lives. HDPE fittings usually do not rust, even in humid climates. It is very flexible and can be used where it bends or twists. Its pipes are low in weight and strength. When used, only the pipe needs to be secured. Therefore, there is no environmental impact or damage. Usually, the ethylene molecule content in HDPE fittings is up to 20-30% or more, which provide a great guarantee for the service life of HDPE pipes.
Before laying HDPE fittings Malaysia, preparatory work should be carried out and construction operations should be carried out according to the construction requirements. Workers should measure the length of the pipe in the field and compare it with the actual length of the pipe or fittings. To facilitate the construction progress, avoid unnecessary disputes and avoid damage and other factors, the pipe can be fixed with gaskets at both ends. In addition, the pipe should be laid to the actual length on site and the grooves should be pressed and the pipe mouths sealed as specified. Finally, the pipe is tested and accepted.